NOIH2SM1000S-HHC【PDF 1/67 页】IC SPACE IMAGE SENSOR 84-JLCC

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录484

[1页]2页 3页 4页 5页

NOIH2SM1000A

HAS2 Image Sensor

INTRODUCTION

Scope

This ICD version is generated after qualification

campaign closure. This specification details the ratings,

physical, geometrical, electrical and electro-optical

characteristics, and test- and inspection-data for the High

Accuracy Star Tracker (HAS2) CMOS active pixel image

sensor (CMOS APS).

The device described in this document is protected by US

patent 6,225,670 and others.

Component Type Values

Table 10 on page 9 provides a summary of the type

variants of the basic CMOS image sensor. The complete list

of specifications for each type variant is given in Detailed

Specifications on page 10.

All specifications in Detailed Specifications on page 10

are given at 25 ± 3 ° C, under nominal clocking and bias

conditions. Exceptions are noted in the ‘Remarks’ field.

Maximum Rating

Table 11 on page 9 specifies the maximum ratings. Do

not exceed these ratings at any times, during use or storage.

Physical Dimension and Geometrical Information

Figure 4 on page 25 shows the physical dimensions of the

assembled component. The geometrical information in

Figure 3 on page 10 describes the position of the die in the

package.

Pin Assignment

Figure 5 on page 26 contains the pin assignment. The

figure contains a schematic drawing and a pin list. A detailed

functional description of each pin is available in Pin List on

page 36.

Soldering Instructions

Soldering is restricted to manual soldering only. No wave

or reflow soldering is allowed. For manual soldering, the

following restrictions are applicable:

? Solder 1 pin on each of the four sides of the sensor.

? Cool down for a minimum period of 1 minute before

soldering another pin on each of the four sides.

? Repeat soldering of 1 pin on each side, including a 1

minute cool down period.

Handling Precautions

The component is susceptible to damage by electro-static

discharge. Therefore, use suitable precautions for protection

during all phases of manufacture, testing, packaging,

shipment, and any handling. Follow these guidelines:

http://onsemi.com

? Always manipulate devices in an ESD controlled

environment.

? Always store the devices in a shielded environment that

protects against ESD damage (at least a non-ESD

generating tray and a metal bag).

? Always wear a wrist strap when handling the devices

and use ESD safe gloves.

? The HAS2 is classified as class 1A (JEDEC

classification - [AD03]) device for ESD sensitivity.

For proper handling and storage conditions, refer to the

ON Semiconductor application note AN52561.

Limited Warranty

ON Semiconductor ’s Image Sensor Business Unit

warrants that the image sensor products to be delivered

hereunder, if properly used and serviced, will conform to

Seller ’s published specifications and will be free from

defects in material and workmanship for two (2) years

following the date of shipment. If a defect were to manifest

itself within two (2) years period from the sale date,

ON Semiconductor will either replace the product or give

credit for the product.

Return Material Authorization (RMA)

ON Semiconductor packages its image sensor products in

a clean room environment under strict handling procedures

and ships all image sensor products in ESD-safe,

clean-room-approved shipping containers. Products

returned to ON Semiconductor for failure analysis should be

handled under these same conditions and packed in its

original packing materials, or the customer may be liable for

the product.

Storage Information

The components must be stored in a dust-free and

temperature-, humidity-and ESD-controlled environment.

? Store devices in special ESD-safe trays such that the

glass window is never touched.

? Close the trays with EDS-safe rubber bands.

? Seal the trays in an ESD-safe conductive foil in clean

room conditions.

? For transport and storage outside a clean room, pack the

trays in a second ESD-save bag that is sealed in clean

room.

? Semiconductor Components Industries, LLC, 2013

May, 2013 ? Rev. 13

Publication Order Number:

NOIH2SM1000A/D

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式